Zhuzhou Up Cemented Carbide Co.,Ltd

Products > hard-face material > tungsten carbide copper welding rod > 1.6~3.2mm/3.2-4.8mm/4.8-6.4mm/6.4-8.2mm tungsten cemented carbide copper composite alloy brazing rods
Product name : 1.6~3.2mm/3.2-4.8mm/4.8-6.4mm/6.4-8.2mm tungsten cemented carbide copper composite alloy brazing rods
Product No. : 2016721101319
←[Previous Product]              [Next Product]→
Online Inquiry         Email Us

  Details:
1.6~3.2mm/3.2-4.8mm/4.8-6.4mm/6.4-8.2mm tungsten cemented carbide copper composite alloy brazing rods
1.6~3.2mm/3.2-4.8mm/4.8-6.4mm/6.4-8.2mm tungsten cemented carbide copper composite alloy brazing rods

A.tungsten carbide composite rod it is made of by sintering tungsten carbide scrap and elastic 
matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of 
sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal 
is Ni and copper alloy,strength can up to 690MPa, hardness HB160.

B. Production time is 7 days

c.tungsten carbide composite rod usage:                                                                                                      

 

it is mainly used for surfacing welding the oil, mining, coal mining, geology, construction and other industries
in some serious wear and tear or artifacts of both cutting.Such as: milling shoes, grinding, centralizer, reamer,
drill pipe joints, hydraulic cutter, scraper, plough planer knives, core bit, piling drill, twist drill, etc.

 

 

 

D.tungsten carbide composite rod size and grade:                                                                                

there are eight grades according the size of tungsten carbide scrap.

 

grade

 

size (mm)

 

scrap size (mm)

 

color

YD-9.5

9.5

9.5~6.5

dark green

YD-8

8.0

8.0~6.5

dark blue

YD-6.5

6.5

6.5~5.0

red

YD-5

5.0

5.0~3.0

yellow

YD-3

3.0

3.0~2.0

pink

YD-10mesh

10mesh

10~18mesh

light green

YD-18mesh

18mesh

18~30mesh

light green

YD-30mesh

30mesh

30~50mesh

light yellow

 

 

 

E. overlaying process of tungsten carbide composite rod,

The oxyacetylene butt, the operating process is as follows:
(1) clean up the workpiece, make the welding workpieces surface with metallic luster.
(2) the flat position of welding, therefore can use the appropriate clamping fixture for control of surfacing
layer thickness, thick piece of available.

(3) with a neutral flame preheating, flame core not contact surface, the distance to 25 mm is advisable.
(4) carbide surfacing welding layer.With YD type electrode surfacing, the use of neutral flame (can be slightly
carbonizing flame) tip is steady on the workpiece surface movement, the flame of the alloy electrode heating
(be careful not to make flame cone tip contact alloy particles), tire body in the electrode alloy melt, carbide
particles are also falling.
Before the tire body of molten metal solidification, the particles arrange, can use
left hand of the alloy electrode fingers, or another person holding a base electrode or pull rod on graphite
rod in a quick stir particles, making them evenly aligned neatly.
Surfacing layer thickness control according
to the requirements of design.

(5) after the workpiece welding, where no ventilation, slow cooling, cannot quench, conditional usable asbestos
blanket cover.

(6) the workpiece after cooling to room temperature, if necessary, grinding surface surfacing to required size
and shape.

(7) clean up the workpiece, remove all splash, slag, etc.

 

 

 


  Related Products :

65/35 3/16
65/35 3/16

65% YD5 3.2~4.8mm L280mm WC and copper composite rod
65% YD5 3.2~4.8mm L280mm WC and copper composite rod

YG(70%) CuNiZn(30%) YD5 1/16
YG(70%) CuNiZn(30%) YD5 1/16

2.8~3.2mm L280mm YD3 65% tungsten carbide composite bar
2.8~3.2mm L280mm YD3 65% tungsten carbide composite bar

10% nickel matrix alloy 70% Tungsten Carbide Composite rods 1/4
10% nickel matrix alloy 70% Tungsten Carbide Composite rods 1/4

hardfacing material 5/16
hardfacing material 5/16" x 1/4" (6.4 x 7.9mm) size grit tungsten carbide composite rod

Yd5 Ni Content 10% Wc Carbide Particle 65% Nickel Base Carbide Composite Rods
Yd5 Ni Content 10% Wc Carbide Particle 65% Nickel Base Carbide Composite Rods

65~70%WC 1.6~3.2MM L450mm tungsten carbide copper welding rod
65~70%WC 1.6~3.2MM L450mm tungsten carbide copper welding rod

Online service

MSN: yangjuan316@hotmail.com Skype: ivyyang316 2498362811 sales@upcarbide.com ivy@upcarbide.com